the 8 plug head was the cam in the ranger 2.3 the same as the mustang 2.3? Also how much would you have to have the head shaved to rase the compression up...
... my ... this ... turbo had a higher nickel content in it that is why you have almost no wear in the cylenders from normal running also the con rods are like...
Hi All, I am new member of this group. We have a Mustang Convertible 1999 in Turkey. The problem is: When i start the engine of my car and put the gear D or R...
Could be a bad ignition switch, use your fist and thump under the steering column and see if that affects things. You might be able to take it out and tighten...
I just uploaded a photo of my new 86 SVO and put a link up for our club here on the coast of CA http://autos.groups.yahoo.com/group/4and6cylindermustangs/...
I'm new to this so I may have alot of questions... such as.... :) can anybody tell me if an 84 v6 automatic will bolt into an 89 4cyl w/a 5 spd manual tranny?...
both are mustangs the 84 is a hatchback and the 89 is a notchback. I want to bsicaly know if my v6 will bolt to the 89 and its 5 spd tranny. There are 2...
I'll have to ask my son, he's a Ford mechanic here in Orlando. He has a '95 hatch and a '95 Cobra. I have a '98 but it's only a 3.8 six. There might be a...
That was supposed to say '93 hatch...duh. ... From: JOHN GROENENDAAL To: 4and6cylindermustangs@yahoogroups.com Sent: Friday, August 08, 2003 6:47 PM Subject:...
Justin. Son Dave isn't sure but we don't think the 4-cyl. bellhousing or flywheel will fit onto the V6. Hope you tried the Fordnatics forum. Why not a V8...
thanks for the tips, I will keep my eyes open in the boneyard, if i get my carb fixed, as for goin 5.0 i do have a nice fairly fresh 302 out of an 80 ltd that...
Motorcraft, says my son who is a Senior Master Tech at Tropical Ford in Orlando, FL. He drives a 2.3 too, in a '93 Mustang. ... From: pbierhuizen To:...
Hello all, I have a 1990 2.3L Mustang LX which I am looking to upgrade, but there are a few questions I have at this point. First of all, how difficult is it...
speedway.com has stroker kits for the 2.3. raceeng.com has some trick stuff for modifying a 2.3 modernperformanceinc.com has some stuff also. stroking a 2.3...
Hey all, I have an '87 LX 5-speed 2.3L and am having a few problems with my tach and fuel gages. The fuel gage usually stays pegged, but occasionally reads...
Try replacing the instument voltage regulator, it's on the back side of the instrments and plugs in like a nine volt battery. It will also make the oil...
Thanks... I replaced the instrument cluster this weekend since the voltage regulator board is now obsolete. This solved my tach problem, but the fuel gage...
Can anyone tell me either what the connector pins on the factory radio am/fm/cassette premium (w/amp)are? I bought this radio at a yard and am putting it...
Go to Circuit City or Radio Shack, they have adapters to hook up any radio to any car. elkon67 <elkon67@...> wrote: Can anyone tell me either what the...
Hi, Can you take heads 1999-2000+ off a 3.8liter engine and put them on a 1990 3.8, I'm rebuilding my engine and want the newer style intake. Thanks John...
Hey John and group, if there is anybody there? As far as I know you can do this. I was thinking of doing the same on my '98 Mustang. I have yet to find '99...
You would be better off finding an old SC engine, they are getting very cheap! Ford did a lot of modifications to this engine to withstand the extra...
