... Thanks, would it be too much trouble to get a picture or two? Don't worry if you don't have a chance to, but it would help. Thanks again. ... and 4"...
my new problem is that the car stalls at idle. its getting worse and worse. my first gues is the carb and that it needs adjustments, ive replaced air filter...
When hot or cold? Or both? First thing I'd check would be choke settings. Maybe the choke isn't opening or closing when it should, or it's simply stuck in one ...
Both, and when i try to move the choke it is stuck open, i sparyed it with choke cleaner but it didn't seem to do much. thanks walter ... From: Ethan Brady...
I just cut out (or maybe grooved out) enough of the top of the cross member to give the driveshaft clearance and then had a square 'plate' welded to the bottom...
Actually, stuck open is better than stuck closed, FWIW. I'd try adjusting the choke. Depending on what setup you have, there may be three screws on the choke...
When the jeep is all warmed up, do you still have this stall at idle issue? My jeep doesn't have a choke and I will stall if i'm not sticking my leg deep into...
Not mine, and the floorboards are rusted, so it's a flimsy tin can, but the motor runs !!! hahahah anyway. I am not here to help my fellow freak, I am here to...
So who has the two tone, dark brown and black J-Truck running around the Englewood/Sheridan area? I saw it the other day at King Soopers at Belleview and...
Jeff - there are a set of cross-member mounting holes a few inches further back from the present location. I simply moved it back and fabricated 2 brackets to...
i have 1966 gladiator J3000 pu, it had a rambler 327 that was a real dog before it threw a rod, the truck had an adapter in between the motor and tranny, i was...
If it is a TH400 tranny, it would be a Buick bolt pattern. The 71/72 years used a bellhousing and crank adapter for the Buick tranny to engine. It would bolt...
Rob, Adding to what Mark write I concur and actually have a line on a ?Buick 350 and a TH400 that will drop right in.? The engine and trans came out of a 68...
N360LL@...
Jun 3, 2008 9:38 pm
72037
Looks like I might be doing carnage Boulder. Anyone want to join in? http://www.colorado4x4.org/vbb/showthread.php?t=124624 Jason & Brutus ... have...
The TH400 will have to have the output shaft and housing for a D20 transfer case, so I dunno how a Skylark or other Buick 2WD will help. If you need a TH400...
Food for thought: I just got another case of oil from Checker with rebate at 49 cents per quart. My buddy who runs a tranny shop said he now charges more...
But the engine is the problem isn't it.? The transmission still works correct?? Why not swap the engine from the 327 to the 350.? The engine and transmission...
N360LL@...
Jun 4, 2008 12:37 am
72043
Good thing I need that non-detergent oil for my 1950 Ford Flathead! ... From: Mark Holzhauer <holzhauer@...> Food for thought: I just got another case of...
jeep4myboys@...
Jun 4, 2008 12:57 am
72044
in venezuela a rebuilt water pump for 360 engine costs 34.88bucks To: cfsja@...: kenhanawalt@...: Thu, 29 May 2008 05:38:13...
Not exactly. From what I know there was a tranny adapter for Jeep from all engines except the 350 Buick. The only exact bolt-up from tranny to engine was the...
David over here next door in Trinidad - rebuilding my cherokee chief - do you have access to parts Eddie in Trinidad ezkb@... ... From: david osorio...
edward bowen
ezkb@...
Jun 4, 2008 11:49 am
72048
I know it's short notice and fuel is through the ceiling but is any one up for chinamans gulh on sunday june 8Th.If you are I'll post more details. Fred G....
For those of you going to Ouray in July we are planning pot luck dinner and trying to get a head count and food volunteers. Please check out the following...
I don't know how well they'd match but I have a pair in my 84 grand wagoneer I don't think they are very rough. I'll look again when I get home after 5:30pm....
It may not matter, but remember that the 88's had the headrests and the 84's do not. Personally, I like my neck in one piece. Ethan ... [Non-text portions of...