Thanks for all the posts guys!! Stupid me, just got around to ordering the door and it arrived today. And haha, I found my little screwdriver on first attempt....
Here is what I use for AC power for my CP990. At Radio Shack I picked up an 6 volt, 800 mA AC adapter (cat. no. 273-1761) In addition I purchased two cords...
In the answer to "Wheregypsyangelsgo" (last post) about AC adapters, mabe I should mention this if there are any radio controlled model people on the list. I...
Hey Steve Wallace's suggestion is a good one. A genuine Nikon product is better than Radio Shack, being made for the job, camera, and probibly will last...
Subject: LACDA "Top 40" Juried Competition Deadline Extended Hi, DEADLINE EXTENDED THROUGH WEDNESDAY FEBRUARY 21 Just a note of thanks to all who have entered,...
spring is here spring is here and I thought it would be a great time to start taking some new shots. I just started getting into blogs, and thought it would be...
I have been having problems downloading pictures from my 990. I use the EH-31 AC power Adaptor to make sure I have reliable power for the approximate 15 min...
Jim, Someone might be able to help you here, but .... I believe that most of us don't use NikonView. We bought the very inexpensive card readers that you...
... My opinion of Nikon's bundled software is at best it is on par with the average virus. However, for the most part, viruses do what they are supposed to do....
G'day Jim In my humble opinion it appears you might have a bad sector on your card. This is what I do, always; I always format the Compact Flash Card in the...
Jan, I second what others have said re using a card reader to access your images. I do use NikonView to transfer the files, since I like the fact that it will ...
I haven't used Nikon's program for years. It is interesting that it is taking so long to download these images. And the CPU has 99% useage. IIRC, When I tried...
Do to the problems I was having with downloading pictures from my 990 using NikonView and other programs not performing well I reinstalled my XP operating...
Last Weekend to Enter LACDA Juried Competition Hi, Just a note of thanks to all who have entered, and a friendly reminder for those of us who would like to...
... I recall looking for one when I was using a CP990, and not finding any. I did check the B&H photo site, and they do have a 28mm to 37mm General Brand ...
Bill, Although it sounds a little odd, I seem to remember that a 35mm rubber/plastic film cannister, with the bottom cut out, will fit over the lens and work...
Here's a possibility you might want to check out: http://members.aol.com/esc2000/SunshieldNikon.htm I have one and it works pretty good. ... [Non-text portions...
You got the wrong end - the guy asked for a lens hood, and you showed him a gizmo for protecting the LCD from the sun. The following site shows how to create...
I read good computer tip. They recommemded to take a picture of each of the screens in the BIOS program. This is one area where you cannot copy to a device or...
The exposure time must be a multiple of the screen refresh period. For example if 60Hz (not related to the AC frequency!, it's only an example) then you should...
... Thanks for letting us know - one day (fingers crossed) it may apply! - I carry my 990 around each day on my walk and it is still going strong Chris Web...
