I have a RF 45 clone and was wondering if it could drill a 1.125 dia hole in cold rolled steel. I bought some prints from www.hobbyinjectionmold.com to make a...
1.25 in steel, 1.5 in cast iron David Cummings All Machine Tools 9435 West Tropicana Ave Las Vegas, NV 89147 USA Phone: 702.400.3460 Fax: 775.942.1084 ...
I don't know how many holes you need to make, but they can easily be BORED with that machine. You need a boring head, but they're not that expensive, ...
I have created a new forum at www.hobbymolding.com. It is a complete forum dedicated to hobby machines ranging from injection molding to woodworking, and...
Howdy, I need to convert some 2D SVG format graphics to G-code. The primary restriction is that I need to do it for free. I've got some utilities that will do...
Could someone point me in the direction of finding specifications for DIN 6499 (ER) as I am considering of making a ER-32 chuck for the Sherline. Why ? Seems...
If you go to this page of discussions on chucks and scroll about 1/2 way down you will find messages dealing with ER32 and ER40 chucks and collets for mini...
does any one have any info on a Duff vertical mill model 30-J with vs4 head they were made in haverhill mass need any info on this machine thanks rick...
Hi Scott You should be able to drill 1/4" holes in 35rc material with a normal good quality bit at around 800 rpm. Maintain constant feed pressure and don't...
USED TO MAKE HUNTING KNIVES TILL A FEW YEARS AGO > MADE THEM OUT OF RAIL ROAD HACK SAW BLADES > THEY ARE VERY TUFF AND COULDN'T DRILL WITH A REGULAR DRIL BIT...
Here is one post from another group with the same subject. :) Hi Chris, Glad you raised the Grizzly dros. They may be of interest to others here in Oz because...
Do you have problem in the implementation of MICROCONTROLLERS in your Automation Systems? We are MICROCONTROLLER specialists (Hardware & Software) and ready to...
I am considering purchasing a Jet JMD-18PFN for drilling holes in bowling balls. I'm upgrading from an old Walker Turner 15" drill press. If anyone has this...
Thanks, but I already have a Jet dealer that I am working with. Just need to decide weather to get the power downfeed or not. ... in ... drill ... much ... do...
I am not a Jet Dealer, I sell the original Rong Fu Machine and I was just willing to try and save you some cash if I could. I respect you honoring your local...
I'm probably going to get the PFN. Only negative is the two handles 180 degrees apart on the downfeed shaft. Might be a little unhandy during manual...
Tom, I've not used a Mill/Drill machine, but have a BridgePort. The power downfeed is very nice when using a boring head, something I do fairly regularly. ...
Soon we will have a desk top cnc gang tool lathe. We will be offering it with a 1c or 3c spindle. My question for the group... is there another spindle you...
Please feel free to visit our online metal store for the lowest priced Metals on the web http://www.industrialmetalsales.com Also Feel free to check out our...
Please feel free to visit our online metal store for the lowest priced Metals on the web http://www.industrialmetalsales.com Also Feel free to check out our...
