i recall someone asking me for the number to dts. google didn't have it listed from my old search, i had to type it in differently. i just found the old...
I know I'm a little late with a response for this but - I work for an insurance company and each comp targets a certain age group with who they want to do...
Its a roller cam. I'm wondering about my old bumpstick in the old 360, thinking about getting it reground. Slap on some springs and roller rockers with a new...
Are you guys talking about the one here in Detroit? They are the ones that told me about this Indy site when I took my Jeep stuff up there to get some work ...
you can go that way but what i would do is call crane cams ask DAVE MAXWELL or PAT they are the mopar guys thier tell them what you have and what you are...
Hey all... A chick just pulled out in front of me at 8:45 Pm today, and buggered my bumper up, and who knows what else..I havent really got a chance to look at...
i put the gears up from my truck on ebay. the link is: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll? ViewItem&item=2426371474&ssPageName=ADME:B:LC:MT:1 and...
Last time I checked the tone rings were on the axles, AT THE WHEEL! :) So unless he has a custom axle setup, the tone rings have nothing to do with the gears. ...
Chris, Sorry to hear about your accident, hope everyone's allright! I think you are talking about Everett Jackson from Ohio, he's got the newer front bumper...
The older grill (pre 2000 I believe) is flat across the bottom. The newer grill dips down in the center to meet up with the bumper properly. You can use the...
Hey, I was just curious if anyone has a rollpan off of thier trucks that they would be willing to sell. On mine, the plastic piece on the inside of it is...
Hey do need a 96 Indy front bumper if so I have a front bumper, right and left fog light pieces, lower valence, upper bumper cover, and the main bumper cover....
errr...my bad i read your email wrong. Im getting a sport bumper and grill for it in a couple weeks. The person's insurance who wrecked me should take care of...
The '96 has a non-return fuel system that runs about 48 psi, at least mind does and I have never checked the spec. in the service manual. IMO you should get a...
Raymond E. Royer
ajrgroup@...
Aug 4, 2003 12:07 pm
32448
I bought a set of power mirrors with the turn signals on the front for the ram. Trying to figure out how to hook up the turn signal part. Just curious if...
if the fuel pressure ends up bring too high or too low you can go get an adjustable fuel pressure regulator. ... least mind ... you ... store), attach ... ...
The fuel pressure should increase with more throttle. The closer you get to zero vacuum, the more fuel pressure you should have. Now Im not saying the fuel...
You can do this, but then you will have to run a fuel return line to the tank. Not a big deal, but alot more work than just plumbing in a line. I actually have...
Clay, Not that I would buy anything from KRC performance, but I do watch their site to see what they have come up with. They now have a full fuel system for...
I havent seen it, Ive heard of it though. Fuel rails dont worry me, because I can buy rail stock and drill it to fit, and make a hold down. My idea was to...
-Why do I have to remove the little valve inside? -- In indyram@yahoogroups.com, "Raymond E. Royer" <ajrgroup@m...> ... least mind ... you ... store), attach ...
Because the valve is basically the exact same type of valve that is on your tires. When you take your tire pressure, a little "probe" pushes in on the valve,...
Good question, maybe you don't. It depends upon whether the fitting on the fuel pressure gauge depresses the valve to let the fuel out. If it does, like a...
Raymond E. Royer
ajrgroup@...
Aug 5, 2003 12:44 pm
32458
Hi Drew, The so called multi-function switch on the steering column is probably the best place. This is the switch that the turn signal stalk goes in to. The...
