yes, I have the same problem with black borders on the 8500 tv-out. The colors seems ok, though - I'm using a PAL system. I also have huge problems with...
220hex
gif@...
Jul 1, 2003 8:20 am
20100
Hi! I'm using the docking station C/Port II together with my Laptop Dell Latitude CPx500H. As long as the Laptop is in the Station I'm not able to send it into...
Yea, but a couple of hundred might be worth it to get a working, optimized system out of the box. Considering how long it's taken me to get my current Inspiron...
I have tried to install RH9 on a Latitude XPi CD 166MMX. Boots fine from floppy (CD not bootable in BIOS)and starts installation from cd. Entering graphical...
Is anyone running .... 1. i8k w/ BIOS A22, and sucessfully using an external display (CRT)? (If so what distro) 2. The above on SuSE linux 8.2? I can get the...
I wasn't quoting any repair, only the part. Time to use my ace in the sleeve... ... ===== "Don't you think that you need somebody?Don't you think that you need...
Could you email me your configuration file? Put harddrive in my desktop, installed perfectly. Removed and placed back in notebook, consistent reboot, never...
Hi, I'm having a problem with lid event and acpid on my I600m. I'm running 2.4.21 kernel with acpi patch. When I push down the lid button, acpid is aware of...
Hello, I just installed Red Hat 8.0 on my Dell Inspiron 8100 and when I execute the "startx" command I get these wierd lines and the screen is all messedup. I...
Hi. I'm using RH9 on a Dell Inspiron 3500 (with 128 MB RAM). The machine has an on-board Neomagic Magicmedia 256AV graphics+sound card. I am facing 2 problems...
Thank you for the response. Here is my hardware list. I imagine it has the 1920x1200 Panel. Please look at below specs. RedHtat 9.0 Inspirion 8500 Pentium 4...
Hi everyone, I am a new user to linux and spend most of my time on my linux partion. However, I can't get my linmodem to work, and that is keeping me from...
I think your best bet is to hit http://www.linmodems.org/ and see if your chipset is supported. Ive managed to set up one in a desktop a while ago with the...
Here's some more info in addition to my previous post. I ran a modem querry application from www.linuxant.com and the querry shows that my modem's device name...
Am Mittwoch, 2. Juli 2003 06:04 schrieb Adam Daniel: Hi, ... the modem in the 8200 works well, if you want to surf the net. Fax does not work with the driver. ...
mchristoph.eckert@...
Jul 2, 2003 6:27 am
20116
Are there any helpful hints for installing RedHat 9 on a fresh 40 gig single boot os...
... Go to http://www.linuxant.com/drivers and hopefully you should find something useful. If you still can't get it going, tell us how you've configured...
Hi Read about following in an article in the last couple of days. The scanmodem program really worked for a journalist who purchased generic, i.e. cheap and ...
... You need to install the propietary nvidia driver from nvidia.com, see the archive for configs and stuff, but its very easy to install now. - Steve...
Hello, I have a VXpocket v2 PCMCIA audio card that is working with ALSA 0.9.4. However, when it's in use by any application, system CPU load goes up to about...
... to ... forget about the ltmodem driver ... if your modem is a Conexant as you reported then you want to get a driver from that linuxant site you mentioned....
* rusty0412@... ... It works perfectly for me (RH9/i8500). It worked immediately after install, and I've had no problems since. Maybe you should check...
* rusty0412@... ... I've got all of that working just fine (well, haven't tried DVD, but I would be very surprised if it didn't work). What I would do if...
Steve Harris wrote: Hi, ... Or you chabge in your XF86Config the value for driver 'nvidia' to 'nv'. This is a standard XFree-driver with no 3D-support, but not...
mchristoph.eckert@...
Jul 2, 2003 12:51 pm
20126
... In kde Control Centre under peripherals/mouse IIRC Ian...
i've got a cpxj750 that i'm running slack on. i'm using a docking station now w/ and external monitor. i would like the option of running at a higher freq than...
... That's it. Thanks a million. Does this change things for X or just KDE? (in other words, if I run another window manager other than KDE, will the mouse...
