I have been following you group for awhile and enjoy reading and learning. Am an older guitar player trying to learn MIDI to record ideas. Bought some used...
Hello, I want to use a guitar MIDI rig to trigger a softsynth as a "virtual bass player". I want the lowest note I play in any chord to transmit midi,...
... No device that I am aware of could. I don't think any processing algorithm could deal with this well. I might be able to build something in Logic that...
there is a hardware device called a 360 systems midibass that does this w/ mixed results, you can pick them up on ebay for $50 or less if you want to give it...
I am forty, have a day job, and play synth guitar as well as straight (electric and acoustic), and it is true that the high tech can get in the way of good...
I finally got the wind controller sounds loaded into my jv1010 through use of sounddiver and a serial port driver download from yamaha. I hooked it up to my...
You will need the GM-70 in front of the jv1010.. D....
mssngr
mssngr@...
Oct 1, 2003 10:28 pm
13474
I tried the gm70 right before the jv1010 and before it with the bc in between, but I got the same result. The gm triggers the jv1010 like a typical connection...
Hi all, just got a GR-1 from ebay, cheap but without power supply and manual - so I use a Korg 9 V/300mA, it is getting rather hot, but worked for first test -...
Tim, At your suggestion I looked at the EMU sequencing stations (XP-7/MP-7). I couldn't download a manual and I can't tell if these units can also function as...
I don't know about the G1-20, but I have an MP-7 and I can tell you it should work fine for midi guitar. The synth engine is basically the same as a...
Hi I have a Roland Gm 70 and a Roland G505 guitar but no cable...:( I have allready gone to my Roland dealer (i live in iceland) and they have never seen this...
Stefán Örn Stef...
ibbets@...
Oct 3, 2003 9:38 am
13479
... Hi Ingo, You recently helped me out in another Yahoo Group so it is my pleasure to return the favor here. If the guys in this group can't help you with...
The pleasure is on my side. Ingo ... -- -- Rapidité, rapidité ______________________________________________________________________________ Horoskop,...
Greets, I have pretty much figured out the format of the Axon AX-100SB sysex dump for a single patch. It is documented in a separate post. I do not know...
======================================== Axon AX-100SB preset sysex documentation Version 0.1 ... INTRODUCTION The raw sysex dump for a single preset is 384...
... Hi Marvin You rock beyond compare, and you'll go down in the history for this one! I'd be willing to either record some sysex for you with my NON-SB or ...
ebay is your best bet. they are not manufactured anymore. they are expensive though $100+ bryan- -- In midiguitar@yahoogroups.com, Stefán Örn Stefánsson ......
What are they called? what am i looking for? ... From: "sparkington" <sparkington@...> To: <midiguitar@yahoogroups.com> Sent: Saturday, October 04, 2003...
Stefán Örn Stef...
ibbets@...
Oct 4, 2003 10:25 am
13487
... (XP-7/MP-7). I couldn't download a manual and I can't tell if these units can also function as a synth engine for midiguitar? I read the MC-909's manual...
... Sorry to follow up on my own post, but further perusal of the manual revealed a diagram of the MIDI in routing which confirms my suspicions. If I had some...
... I read the MC-909's manual and I don't think the OS has the depth to function w/ a guitar interface. What you need is ability to address several MIDI...
... Could a GI-20/EMU command station combo conceivably work? GI-20 has bank select (unlike GI-10) so you can store your live guitar patches in there, I don't...
Stu, Thank you for the info re: MP-7. It sounds like a great way to get P2K and sequencing...and a lot less $ than the MC-909. Do any of the expansion ROMs...
... Because the shared manual makes no mention of differences between the sysex implementations for SB and non-SB models, I surmise that they are the same....
Go Marvin GO! I checked with MidiQuest, etc. and NOONE has any editors - although there ARE Yamaha XG editors out there, but not as it relates to the Axon. I...
- ... I can't tell if ... back of the ... at all from the ... Joel: You can get access to the sythn from the midi out of the Gi-20 Via the USB. Playback from a...
Maybe I should butt in here as some of the confusion over G50 vs. Piezo comes from me. I had a G50 - loved it. It worked fine with a G1d pickup mounted on a...
