In a message dated 5/31/2007 4:51:52 P.M. Central Daylight Time, thomas.neves@... writes: I have a radius uhf D44LRA7P29BK with the same problem. if...
Does anyone know (and can tell me) what the low voltage threshold is on the GP300, i.e. the point at which you get the low battery warning double-beep? Thanks....
www.Photobucket.com ... From: radio-programming@yahoogroups.com [mailto:radio-programming@yahoogroups.com] On Behalf Of Doug Sent: Friday, June 01, 2007 6:14...
I don't know the answer, but the battery tags on the back plate go high-resistance on the point of contact with the battery and most times is cleared by...
I have the program and the cable and I'm triing to program it with portable 486 computer but it gives an error. I found that my computer is to fast for the...
Try going into the bios of the computer and turning off all types of cache I have done this before and it seems to work pretty well. Gary _____ From:...
OK folks..tried 2 versions of radmbl, v 8.0 and the european version. getting radio not supported errors. The radmbl.mdf file does not show my radio's suffix...
I try to read my motorola spectra, but it will not read the radio. The radio shows programming but it just stays like that and does nothing. I tried a new...
Mitch, Is one of the radios a high-power model? The programming cables are different between high- and low-power models. 73, Eric Lemmon WB6FLY ... From:...
The radio I am programming is the low power spectra, I did not clarify the other radio the I am programming is a radius different cable than the spectra, so I...
Ok, your willing to open the case. Good. What do you want it to do when your done. Maybe you should just replace the eprom, re-initialize, tune it, and enjoy. ...
self programming is open the case you will see a small slide switch on the board flip that and when you tune the radio on hold the outside buttons, i think the...
The low power Spectra uses a cable that plugs into the rear of the radio unlike the Radius/Maxtracs etc. Depending on the speed of your computer, you might...
The low power Spectra uses a cable that plugs into the rear of the radio unlike the Radius/Maxtracs etc. Depending on the speed of your computer, you might...
many keep old 486 and slower computers around JUST FOR old rss and old radios. I have a version of lab that ONLY works on slow machines. 33 mhz or less !! so...
I also tried it on my IBM thinkpad 380D do not know how fast or slow that is, and also have problems with that keep getting line locked error or serial bus...
I'd like not to have to initialize it. I has some of our sister company's frequencies in it, I just need to modify it to our side of the world. I do have...
OK, I have now had a chance to play a bit. I have programmed 48 channels 1 to 40 are simplex and 41 to 48 are repeater channels. A normal progam of the 48...
thanks, up and running... ... From: "Dakota Summerhawk" <sg14ranger@...> To: <radio-programming@yahoogroups.com> Sent: Friday, June 01, 2007 8:21 AM ...
Closest I have seen to this model number, I have recorded the following... Radius /conventional "radius.bin" Eprom 27C256 /\/\ 20.00 1989 32,768 bytes....
Kev wrote: "so how do the Kenwood radios get certification? many of those are field programmable" Kev, I don't know what the regulations are in Australia,...
Anytime Doug, Need anything else just give me a shout. Dakota Summerhawk ... From: radio-programming@yahoogroups.com [mailto:radio-programming@yahoogroups.com]...
