Hi all , i search a bin file of channel eeprom ( 2816) for the Storno 6662S for UHF 70cm operation , my damned RSS here will only generate bin -files for the...
I am trying to program an HT1250, with CPS 6.05.03 I read the frequency and PL tone with a RS PRO-97 scanner, and it displayed with DPL tone 526 (I don't have...
The inverse of D526 is D325. The unexpected inversion of the CDCSS codes is common, due to phase reversals within the audio detection and decoding circuits....
HI I got one of these but i have followed the instructions how to scan the channels programmed in the service manual but when im selecting the scan mode it is...
Hello all. I have a TK 272G portable that I can not get the rss/cable to connect with radio. I cleanded out the ports where the cable connects and still...
http://www.tampascanner.info/tones.htm Good chart on PL and DPL includes the inverted ones as well Have fun with the radio programming! Been programming a...
I am trying to find the software to program a ht750 I have read all I can find on this radio.Even Batlabs and am still confused.Ham dmz has some for the waris...
Hello my software (KPG-34D) will not read/write to my radio is there something i need to do on the radio before reading it, i have tried all versions of this...
buy a different cable make sure it its not doesnt have any other ends on it. i went througt the same thing before. ... [Non-text portions of this message have...
I found by my own mistakes that its most of the time something simple but hard to find.check your connections make sure your radio is making good contact with...
You're on the right track; the HT750 is a Professional Series radio of the Waris design. You must use HVN9025 CPS to program any mobile or portable radio in...
I just checked on my own HT1250, and both 325 and 526 are perfectly valid codes, either normal or inverted. Did you set the "Squelch Type" to DPL first? What...
Hello, I am interrested by this software KPG-74DM2. It's possible to sent this soft by email ? What's your price in euro ? Thank you. ... 480MHz ... floppy ...
Does anyone know anything about a tekk t80? Jim ____________________________________________________________________________________ Yahoo! oneSearch: Finally,...
I'm looking for programming information / cable schematic / Software to reprogram a Ranger / RCI 7100V VHF hand held. Anyone have any info on this thing? ...
... Rubbish my dual cable (KPG22) works fine having two connectors shouldn't stop it from working what software and version and operating system are you using?...
Jim, I have a Tekk handheld VHF radio that has a "T-8" label on the front, but a "T-80" label on the back. It requires a Tekk PC-800 programming cable, which...
I am using version 6.05.03 I am checking the box for DPL, and as soon as I type in "526" or "326" in the box, the lettering turns red and it tells me that it ...
Stan: this radio is vhf AND I can't find a thing about t80 Jim ____________________________________________________________________________________ Shape...
