Check out G-M-R-S.org Repeater Directory for NY <http://www.g-m-r-s.org/inside/repeaters4gmrs.htm#NY> <http://www.g-m-r-s.org/inside/repeaters4gmrs.htm#NY> ......
Hi Jay I do not have the newer software but i was wondering if it would be possible to get the cps u have i have the old dos version and would like to upgrade....
Hi. I've been trying to reprogram my wife's CP200 with the tones for an ambulance service we just joined. I want to set up a pager channel that works like a...
Hi all, Looking for a codeplug to suit an MCS2000 M01KHN9PW5AN 136-174 MHz 1-25 Watts Model III, 2x14 digits 25/20/12.5 kHz 160 modes. If anyone can help out I...
Hello again guys, i had a problem, that i must solve this problem, with help from you, guys, first i had a GP328 handheld, 16ch, version R05.13.04,model...
Hi All, wondering if someone can send me a copy of Motorola STX821 software I have a radio and programiing cabels all i'm waiting for is the software. Thanks ...
what I have been told, the way to do it is designate 1 channel just for this, set the QCII call correct for tones and Call alert with voice is fine. On the...
Im interested in a Motorola Maxtrac with the SN D33MJA7DA5CK but i dont know what the bandsplit is on this radio...i know its a VHF but thats about all..any...
Hiya folks. I've been able to read & program the 5011 version (16 channels, no display, but G-Star encode & selcall, etc., on both UHF & VHF). RSS is v2.3.3....
Hello all the group, Anyone could help me with my problem. I got a motorola portable GP328, 16 Ch ,but the problem is when i gonna read a radio codeplug, then...
Hello all, anyone know which programming cable suit to programming this radio, all i have seen in the web, look like they using RJ11 type connector, but the...
Thanks for your help. I have done what you have described, using "call alert" as my selection. The radio alerts, but we cannot hear any audio. This is true...
Charlie Pull the face cover from the radio, be careful the speaker wires are attached. On the right side of the RPM-450 is a small red programming plug. There...
I have got a EADS THR880i here in DMO with a motorola MTP700 both in very good condition - the eads set has got case and charger, MTP700 doesnt come with...
To properly setup radio as a pager, you must put the CPS into expert mode. Not all functions are available in basic programming mode. Go to [View] drop down...
Also, if the plug is missing, a 1.8k resistor will do the trick. That's all they were. Stan... I used to have the manual many years ago. ... From: Jay To:...
I have a programming manual somewhere in the basement for the Ritron Handheld but not sure for which model, what model are you programming? "Stan Labinsky Jr."...
On Maxtracs and many older model Motorola radios specific band split information is not available from model number. It is a VHF highband radio. Most band...
Good morning. Is anyone familiar with programming the Motorola PR860? Does this have its own software or does it use the same as the professional series? Can...
Hello, i m having trouble to programming Motorola portable radio GP328, the problem is i'm using a cps version R 06.01.00AA maybe older enough, and i need a...
Do these units have a different IF? They were origonally trunking radios,after installing conv firmware they appear to TX 11.835 mhz higher than what is...
Trying to track down a copy of the software to program a tk-3140, thanks ... Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. ...
A County Government here in Central Kentucky is looking for a weatherproof cabinet for a repeater project. They're not picky - the only specifications they've...
