Mike, Try the following member websites as well: http://nevr2qk.carlc.com (go to the installations page) http://www.rhinobrothersracing.com/ ...
Brock Ivers
bivers@...
Jul 1, 2003 12:14 pm
27501
Replace everything. I'm sure none of those parts were intended for open track. You can call D&D to confirm. Brock Hello all. I have an 88GT that is set up...
Brock Ivers
bivers@...
Jul 1, 2003 12:34 pm
27502
I just went to my first OT event last week. I was worried about much the same things you are. I'll just give a couple points about my experience. overheating-...
Hello, I am new to the list and have an 89 lx, 331, griggs, etc etc etc. I am on a couple other lists, but havent found the info I am looking for. This...
ARRGH! I forgot one important thing about the brakes -- flush the fluid with a good high-temp brake fluid: Ford Heavy Duty Performance Friction Z-rated ...
I'd pass on the race rubber. Sure it's quieter and quicker, but that's besides the point. It's less forgiving, with a more peaky traction curve, and it's a...
Whitehead, Scott (S.)
swhiteh3@...
Jul 1, 2003 2:05 pm
27507
I'm installing a set of Alum. rack bushings in my '90 GT. To allow the rack to move forward, the instructions say to "remove the one bolt retaining the...
Chris: Many of the list members have used power assisted colling for the brake systems. The bilge/vent air fans used on boats are commonly used. This is what...
Yep, invest in the driver, and good things will happen! Also, I don't know if this has been mentioned, or not, I haven't been keeping up with this thread...
Gene Beaird
bgbeaird@...
Jul 1, 2003 3:22 pm
27510
Well, since I don't see much action on this thread I give my answer. I doesn't seem that it would matter much which bolt is removed. The one they are talking...
Thanks for the info... I'll probably try the bolt by the firewall first (holds the steering shaft to the shaft coming through the firewall), as this seems ...
i'd do the pinch bolt that couples the steering pinion to the rag joint. it's pretty easy to remove, and there's only one way to put it back correctly. the...
Does that pinion have a flat to align it with the rag joint or just splines all the way around? I can envision taking it apart, and having something come out...
I've thought about modifying or fabricating something like a March ram air or cold air induction (whatever they call it) kit for brake ducting duty... ... ...
Richard, Which of these blowers are the ones that most people use? Are the Detmar blowers worth it and are they water proof? BTW, where do you mount these...
George Kokolakis
rgbcons@...
Jul 1, 2003 8:12 pm
27519
it has a flat in it. you won't be able to thread the bolt in by hand if it's not aligned properly. for good measure, mark the pieces (whiteout works well)...
On the LX cars the bulges or the roundedocrners of the lower fachia is where 1" holes are made in a circular pattern. Some of the listers are using a lower air...
Welcome to The Road Racing and Autocross Mustang List Charter: The Road Racing and Autocross Mustang List is for discussion of technical issues related to race...
rrax-mustang@yahoogro...
Jul 2, 2003 2:02 am
27522
Depends on what size duct would be used. I'd get whatever the duct hose size could be had for cheap. Most of the semi-truck salvage places will part with the...
Just got a set of Cobra Imola II race seats and the Cobra brackets. Problem is that the front mounting bolts are higher than the rears which puts the bracket...
I've been using a Testors silver paint pen from the toy section at walmart it makes nice straight lines for things like this and making timing marks...
I bought mine at Muscle Motorsports, the used NASCAR parts place in Huntersville, NC for $.50/ft. In fact, I bought the used fans(2), inlet horns and hose for...
electric - 12v I believe </wisearse> (sorry, couldn't resist!) Jim Pantas www.wildhorsesracing.com 704.436.8211 "Your Performance Mustang Parts resource"...
Check JR's garage. They have used NASCAR stuff. http://www.roushracing.com/usedraceparts/default.htm They have things from time to time at good prices. George...
