... When I tried this with my 351W in my Capri I couldn't do much to get that routing to work. The belt coming off the P/S pump up to the tensioner would...
Teddy You're absolutely right about them only costing 50 cents and not taking a chance But my only source for the TFE hose end olives was Hoerr racing which is...
Perhaps the Yahoo's FordClubWagons group could assist you. http://autos.groups.yahoo.com/group/FordClubWagons/ ... __________________________________ Celebrate...
Posted these FS items on CC.com and while I realize most of you frequent both this group and CC.com I figured I'd inform those that don't. As stated these are...
Please, someone buy this stuff from Darren. That way he won't have excuse not attend the AI and CMC Season Opener @ MSR this weekend. ;) Adam ... From:...
Will this event be open to the public? ===== Buddy You might be a racer if you think wings and other aerodynamic devices were designed to PREVENT flight. ...
Hello larry, Yes its open to the public. Thanks, David Fincik 89 Mustang LX, A4 331 Stroker, 325rwhp. 360rwtq, Full Griggs, Cobra brakes w/ABS Yahoo Racing...
Is it possible to take a 3-1/2" stainless steel round pipe, and "crush" it with a shop press, to make a 2-1/2" x 4" oval pipe? I know you can buy oval pipe,...
Rudis, Darius (D.)
drudis@...
Mar 3, 2005 2:48 pm
33147
Darius Yes you can do this. You'll have to be careful no to scratch the pipe, and the oval may not be mathematically perfect. However, I don't think you can go...
Darren, I'm interested but what would it cost to ship to Northern CA? Thanks Richard ... http://corner-carvers.com/forums/showthread.php?t=21906 ... ...
sent to two mailing lists.... Bought a prelubing shaft for electric drill from Summit. Rigged it up, ran my Makita drill in reverse. After about 15 seconds...
I thought you where supposed to run the drill forward.maybe leave the unit in and turn the engine over by hand once and see which way the shaft turns sounds...
Pete, When I first started my 393, I pre-lubed it with a 5/16" socket taped to a 12" extension - fit the MSD HD shaft just fine. The drill does run in reverse...
MessageHi Folks, I have my Bill Mitchell World Challenge Mustang Cobra Race Car for sale on Ebay. If your interested in a very nice car please have a look at: ...
Just wanted to let you guys know that our Daytona season opening race will be aired on SPEED channel tomorrow (Saturday) at 11am, at least for those of you in...
I've built many an engine, prelubed them the way Alex spoke of, and never had to pack a pick up or pump with vasoline. The drill in reverse does it every time!...
Can anyone tell me what the policy towards commercial advertising is? I just purchased Apex Motorsports in Santa Clara, CA and would like to offer some...
Mike Mak
MMakintrax@...
Mar 5, 2005 2:18 pm
33157
Can anyone tell me what the policy towards commercial advertising is? I just purchased Apex Motorsports in Santa Clara, CA and would like to offer some...
Mike Mak
MMakintrax@...
Mar 5, 2005 2:36 pm
33158
Typically I think that we frown on commercial advertising Mike. But I think that is because we don't want tons of unsolicited morons we've never heard of...
I have built many engines and my normal proceedure is to fill the pump with oil by hand before I bolt it on the engine, then after assembly I prime it with a...
I just picked up a 1988 LX 5.0 for HPDE and PDA track days. The car is pretty solid, but the fuel and brake lines look pretty bad. No problem fixing the brake...
classic tube they should have every thing you need.(716)759-1800 rjb68fb <Rjb68fb@...> wrote: I just picked up a 1988 LX 5.0 for HPDE and PDA track days....
i just fired up the first engine i ever built myself, an efi sbf. the first time i fired it up, it didn't run so well, because i later found out that i dorked...
I have tried to do a search of the archives but a problem with the memory on the server or something prevents me from getting any results. Where can I get some...
ford has discontinued the lines, but you can find some nos. i had found a set outta state, i paid dearly in shipping. ask your local dealer to see if they can...
For the hard lines, I just bought the last new set in the whole country, according to partsvoice.com. Got them from the dealer in Carson, CA. Stangparts.com...
