I had a set of Corbeau Targa RS's ( now called the TRS - http://www.corbeau.com/products/trs/trs.shtml ) in my 86 GT. I like the fit, but they didn't wear...
I am considering gettting the Arizen seats. They are copies of the Recaro Speed seats w/ lumbar and cost ~$500-600 for a pair.. So far from what I have read...
mike, sorry i didn't get back to you sooner. i bought it not all that long ago...around november 2004'ish? i got almost the same kit you got, mine was the...
... that odd studded bolt belongs down by the smog pump and the timing pointer. it's where you attach the bracket that keeps the smog pump from swinging. i...
you could try to track down a pair of recaro SRD's. they're what i have, and i'm told they're what is in the 2000 cobra R, so they will _definitely_ fit....
Actually, the seat in the 2000 R was the Sport model which had some upgrades, as well as the stitched logo, if I recall. I got mine (base model) about 18...
... understeer, loss of negative camber leading to accelerated wear on outer edge of front tires. -t. ____________________________________________________ ...
Well here is a nice break from questions about whether a 275 will fit on a 9" rim and if it will fit under a Fox fender. Just the standard thinking out loud...
I would think you could adjust your driving to take care of a tire that doesn't turn in as quickly as another. You can't, however, do anything about lateral...
Gene Beaird
bgbeaird@...
Aug 2, 2005 6:01 pm
33801
yeah, lots of measuring. also depends on the suspension design and geometry. that information typically gets entered into a suspension modeling program. that...
Lateral grip will improve but straightaway speed will decrease noticably from increased friction and a larger diameter. Also while the tire will reduce...
The big tires shouldn't hurt straight line speed too much as the car makes 700 rwhp. Power steering is a stock car BRT rack with a KRC cast iron (high output...
Update on my findings... Found leaking vac. diaphragm on diverter valve - plan to buy a replacement at Autozone. Leaking vac. diaphragm on EGR valve (won't...
Obviously correct me if I'm wrong; but NOx is created by high temps, as stated before on this thread. And, if you retard the timing (too much) it will increase...
You are correct. If the timing is advanced past the factory settings, though, it can also cause the NOX to go up, so setting it back to factory settings is...
Gene Beaird
bgbeaird@...
Aug 4, 2005 7:18 pm
33807
I think that I may have my base timing set at 14, and was going to set it (back) to 10. I have to check the manual to verify 10 though. Steve ... From: "Gene...
In a message dated 8/4/2005 8:04:34 PM Pacific Daylight Time, ... Steve, 10* is stock on a Fox-body. Here in CA, they check for timing during emissions tests....
Hey Group Pretty much been a lurker till now. I'm installing a Griggs SLA in my 93 LX and have found that my stock fenders no longer fit, the whell is moved...
... how about using a body saw or hacksaw on it? if you're careful, you can do a pretty neat job. -teddy __________________________________________________ Do...
Someone over on Carner-Carvers.com hacked up and welded a set of fenders back together with opening moved forward. But I believe he was going to use them to...
My old battery died pretty hard last weekend, so I figure I'm due for a new one. I've always heard/read good things about the Optima red top batteries, so I...
I can't remember; do the posts in the FOX body have the same layout as SN95? If so I could get a model # from my '97 when I get home. I picked up whatever...
Steven, The stock Fox setup uses terminals on top of the battery, and that's the way my trunk-mounted battery box is set up, too. Pat Olsen '89 GT convertible ...
