Scott, When you ordered your tri-link did you also order the exhaust tubes? I don't know if they still offer them but they used to offer a set of U shaped...
George Kokolakis
rgbcons@...
Aug 1, 2006 8:00 pm
35169
Nope, the Cat back is a standard fare SLP Power-flo. I tried a Magnaflow, but it wouldn't work with my MM PHB. I'm sure the Watt's link would have been an even...
bob, no, i don't recall exactly, but the speeds you're talking about sound more like turn 1 speeds. no way i could make my car stick at 90 mph in T2. i think...
I usualy turn into Turn 1 at 85-90 mph, to be safe, and exit at 100+. Turn 2, I enter at 75 and build speed in small increments until I hit 80, then as I tuck...
Does anyone know the diameter and pitch for the bolts that hold in the oil pump to the block? and/or the oil pickup tube to the oil pump? I'd love you forever...
From: "Steven" <my72vette454_4sp@...> Reply-To: rrax-mustang@yahoogroups.com Date: Fri, 04 Aug 2006 21:22:48 -0000 ... in the ... Just a stab in the...
steve'o iirc, my melling pump came with the right sized bolts. OT: does ian work near my house? if so, he can drop my sunglasses on my porch or mailbox. pete...
Pump to pickup: 5/16, 18 pitch, 1" long (including the head) Pump to block: 3/8 16 pitch, 1.5" long (including the head) These both have split lock washers --...
Thanks Mike and Bob. that's great! Is there a reason I can't use grade 8 from the hardware store? Heck of a lot cheaper than ARP..... (or is that why? lol) ...
Hi all, While my car runs fine I find that it sometimes seems to to start dying on me in the upper rpm ranges over 4000rpm. Sometimes it pulls hard and other ...
George Kokolakis
rgbcons@...
Aug 8, 2006 6:15 am
35179
I can't see a MAF getting you anything at WOT. It's not a difficult modification to DIY, and relatively inexpensive. The hardest part was finding the MAF...
http://www.speedtv.com/commentary/25586/ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam...
richard, I don't have web access right now. Why does nascar care about us open-trackers? -- pete out... Sent from my Treo ... From: Richard_Lopez Date:...
... ammendment ... This bill was aimed at a Champ Car street event in Phoenix and has since been tabled. It doesn't appear that the author(s)even realized that...
It doesnt really sound like you need to switch over to MAF, unless you are planning on changing cams. Do you have a fuel pressure gauge installed that you can...
Maybe ignition? A long time ago my '87 was speed density. I had similar mods to yours. For some reason, on the street the car ran fine, but on the track it...
Mike, I do have a pressure regulator with a gauge but it's under the hood. I've tried playing with the fuel pressure and changing it from 38psi up to about...
George Kokolakis
rgbcons@...
Aug 16, 2006 6:29 pm
35188
Scott, You bring up an interesting point. In trying to deal with thisproblem a couple of years ago I figured I needed to improve on the stock ignition so I...
George Kokolakis
rgbcons@...
Aug 16, 2006 6:46 pm
35189
If it's not spark, and it's not air, that leaves fuel. Are you still running the stock pump? When is the last time the filter was changed? If you can't see...
Slop in way-too-old timing chain...? Darius Rudis AOS Request Management (313)20-67009 drudis@... W1E121 - Itek Center, 15575 Lundy Parkway, Dearborn MI...
Mine's also an '87 gt. During the mass air conversion, I also put in a crane hi-6. Worked great. Then when I put in a 408 a couple of years ago, I pulled...
Yes, MAF or you would have to get a chip burnt....I would just do the mass air. The speed density can handle most mods, but not a cam change. What fuel pump do...
Teddy, I think it was the TFI module I replaced with an Accel unit. Everything else is is bone stock. How do you check the rest of the components? Thanks, ...
George Kokolakis
rgbcons@...
Aug 17, 2006 3:16 am
35196
Mike, I have not changed the fuel filter in about 2-3 years. I replaced the stock fuel pump with some kind of high flow fuel pump but I have no idea as to what...
George Kokolakis
rgbcons@...
Aug 17, 2006 3:17 am
35197
Darius, I don't know about a timing chain issue as the motor runs and starts fine. The motor only has about 80,000 miles on it but it's been run in autocross ...
