I really need to replace at least the driver's seat in my 1990 LX 5.0. I drive about 100 miles per day in my car and would like to get some really COMFORTABLE...
Just wanted to know who has what and what they think about the various blowers out there. Its time to supercharge. Thanks Mark 5.0...
IMIEIW@...
Feb 10, 2002 10:46 pm
2655
Ok this is my car. I own a 95 gts with 87,000 miles. It has the following mods, mac cold air intake, underdrive pullies, jacobs ignition 5.0 kit, mac shorty...
I am about to add a tranny cooler and could not find the warmer line from the radiator to see which is the return line. If someone knows which line is the...
Rodenborg, Taryn
tarynr@...
Feb 11, 2002 1:53 pm
2657
This should not be an issue, unless your new cooler has some sort of directional valve. Most of them don't. I always run the top line to the top nipple on the...
YES, I WOULD LIKE TO USE THE RADIATOR ALSO. THIS UNIT DOES NOT HAVE A DIRECTIONAL VALVE. I WANT IT TO RUN FROM THE COOLER BACK TO THE TRANNY, NOT FROM THE...
Rodenborg, Taryn
tarynr@...
Feb 11, 2002 5:23 pm
2659
You are correct in needing the flow direction based on how you want to set this up. A very simple way to figure this out is to remove one of the lines, ...
I have Vortech S-trim on a completely stock engine. I chose it because: Price: 2684.00 at Year One. (Had a 30% off sale at the end of the year) Best Novi price...
RE: [sn95] Best blowerI'm don't have a blower or anything and probably can't help on this subject, but how is the Procharger P-1SC? (the self contained ...
Mike Smith
michael.r.smith@...
Feb 11, 2002 6:13 pm
2662
i would say check your plug wires, if you have two or more in the wrong place, that will seriously affect power. I would also make sure you're getting spark...
daves302gt@...
Feb 11, 2002 6:14 pm
2663
I really looked at these. First off, I don't like how it mounts off the end of the stock A/C bracket. I heard others on some boards complain about flex. They...
RE: [sn95] Best blowerYou may also want to look at the idea of turbo charging. Turbo charging is a much more efficient way to make horsepower since it does not...
Chris Griesbach
r.griesbach@...
Feb 11, 2002 7:21 pm
2665
No doubt here. I needed something legal in Ca., though... Dennis ... From: Chris Griesbach [mailto:r.griesbach@...] Sent: Monday, February 11, 2002...
Is anybody building their '94-95 GT into a race only car or parting out a wrecked or theft recovery GT? If so, I need an ABS module for my '95 GT. Ford of...
I am planning on installing a hughes performance 2500 stall converter in my 1994 gt. Any recomendations for a tranny cooler?, preferably, best bang for the...
A friend of mine had Cervini Stalker side scoops stolen off her yellow '01 Cobra ragtop. The car was parked in her driveway in the east end of Toronto. Since...
I have had good luck with mine and am now installing the B&M trans cooler rated for 24000 GVW from Summit racing for $50. The only thing that I wish could be...
Rodenborg, Taryn
tarynr@...
Feb 18, 2002 1:35 pm
2675
I am finishing up the install of Steeda sport springs, Steeda X2 ball joints and Tociko shocks and am having a problem with connecting the quad shocks back up....
Rodenborg, Taryn
tarynr@...
Feb 19, 2002 2:22 pm
2676
it's probably the angle of the differential housing, try jacking up the unsupported section and playing with the front/back angle of the axle, there is a great...
daves302gt@...
Feb 21, 2002 5:00 pm
2677
5.0L GT40 lower ported and gasket matched to Felpro 1252 exhaust gaskets and smoothed and straightened thru the runners. Excellant for blown/turbo setups. ...
ok, heres the question, i'm swapping my 94 gt auto to gt-40 heads, and i was wondering if while i was inthere i should go to the e303 or b303 cam. can i...
daves302gt@...
Feb 25, 2002 5:15 pm
2679
The stock ECM does not like the E-cam. I did the E-cam/blower setup and had to get a JMS chip. The 94/95 ECM really s**cks when it comes to any real mods. I...
I can say this with heartfelt emotion: DON'T DO IT. The 94/95 cars are relatively few and far between, and hardly any shops have experience with them in terms...
Joe Cargal Jr.
jcargal@...
Feb 25, 2002 8:38 pm
2681
I was running the PD with e-cam and never did get the tuning problems worked out. I eventually popped a head gasket and pulled the motor. Another ECM such as...
