Captain Joe wrote: 'I'm not convinced that much water comes through the hull deck joint anyway. If it does, it may be coming in through the screw holes rather...
I tried exactly that on a small section that looked like it had leaked. I still get water under the sink-probably rain and condensation but it has to be mostly...
How about the proper torque for the keel bolts??? Salut! Robert Brisson T22 #1311 Natale, OKA ... From: Andrew Evans [mailto:foolishlaughter@...] Sent:...
Fix it once, fix it right. Take it apart and rebed with 4200 or equivalent. Little leaks become big leaks when you don't need them. regards, pete T-26...
Peter Fuller
PeterF@...
May 1, 2003 4:08 pm
13461
Thanks! Im going to do it the right way. regards, Howard T26 ... From: Peter Fuller [mailto:PeterF@...] Sent: Thursday, May 01, 2003 12:10 PM To:...
Howard
whatifwhatnext@...
May 1, 2003 4:23 pm
13462
Howard: That is great... I check all through-hulls every year. The prior owner of my boat just kept adding silicone to fix things... once I took all of it...
Owen: Im going in on the 8th. I heard some really scary stories about transponders especially. Also I bought a kit of plugs just in case Howard ... From:...
Howard
whatifwhatnext@...
May 1, 2003 5:15 pm
13464
I have been working on my T22 and have found that I need some sort of compound to take the grime off of the white part without ruining the blue stripes. Then...
... From the reading I have done it appears the problem is with the grounding green wyre and the mixing or incorrect wyring of the white wyre. Then there is...
We had a meeting of the new executive of the Association recently and thought we should make ourselves known to you. The AGM was held in March at the Nepean...
Hugh & Maryetta McDow...
hmmcdow@...
May 1, 2003 8:36 pm
13468
Howard: One thing... they recommend waiting SEVEN days before launching after putting on Sikaflex 291(?)... please find something that cures launch ready...
The depth sounder on my T-26 is mounted on the port side, inside the locker underneath the cabin seat. First there is a piece of PVC pipe, about 5" in diameter...
... I've been using a West marine brand of heavy duty cleaner, the most aggressive-sounding paste type I could find. It is just a cleaner, not a wax or other...
I cheated. Mine's on the Starboard side, just under the area where the stove sits. I just epoxied the transducer in place (attempted to get as few air bubbles...
Kent & Laura Hunter-D...
khd@...
May 2, 2003 12:06 am
13473
Re the Keel: I commend Hugh for giving us a welcome message. However, I have serious concerns about the rule-making that seems to be going on. Is this needed...
Tom Shenstone
tshenstone@...
May 2, 2003 12:22 am
13474
Thanks - I think im ok we are using 3M 4200 which is fast cure HO ... From: owensch2000 [mailto:owen.schneider@...] Sent: Thursday, May 01, 2003 5:00 PM ...
Howard
whatifwhatnext@...
May 2, 2003 12:36 am
13475
you might like a stuff that came out a few years ago and it works wonders it's called MAG I've seen it in marine supplies putlet around Montréal so it should...
I was told 100 ft lb for a T26 and it worked Le Petit Prince T26 366 ... From: Robert Brisson <brisson_robert@...> To: <tanzer@yahoogroups.com> Sent:...
... Craig, are you an association member? If so you should have received a slip with your Tanzer Talk in the Fall notifying you of the suggested changes to the...
for wath its worth I was told that you can not mount a Autohelm transducer in a tube it apparently will work only in a trough hull set up Le Petit Prince T26...
For the brown water scum line I use a product called "On and Off"...you can purchase it at West Marine...I put it in a spray bottle and spray the brown scum...
summerwind26@...
May 2, 2003 1:56 am
13480
The rule change made is subsequent to the one you mentioned. It was apparently made in the last two weeks, by the Executive. Tom Shenstone ... [Non-text...
JPB Please remove my boat from your list. I sold it last weekend. Thanks for all your help and support over the past couple of years. Your www.bora-bora.net...
Wanted to know, The "Factory" pole for the T22 is what Dia? I have gotten ahold of a pole that is 10'11" in length including fittings and it is 3" in Dia. I...
... No. ... ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail :...
About two years ago I bought some kerosene burners and tried to convert my alchohol stove to a kerosene stove. Don't ask me why, I don't remember anymore....
