... In our experience, Happy Hour(s) extend from the first Tanzer crew's arrival through the last crew's reluctant return home. GAWD, it's fun to be with other...
Oh I am very excited to see you all again! I hope you all can make it!! I promise, Bill, not to make any "weird" food this time. But I will make lots of good...
Hi Ralph, I haven't been able to get through to you by email, but I was interested in getting a new main and genoa. My fees have been mailed to the Tanzer...
After reading the posts on mast lowering and raising I still do not have a clear picture as to how to achieve the task without endangering the mast the boat or...
Yes. Do it slowly, have one person on the cabin top to steady the mast and take some weight while lowering. The other person is the final catch system. You can...
Thanks for the input guys, Moby's site and pictures are indeed worth a thousand words. Cheers, Gordon ... endangering ... spinnaker ... off ... "Does ... the ...
After using a couple of methods to raise and lower the mast, I finally built the tanzer "A" frame. There is a diagram in the files which gives one an idea of...
Steve, I looked in the Tanzer files but did not find the "A" frame diagram. Could you be more specific, i.e. what section, under what heading. Cheers, Gordon ...
Gordon, I believe he is referring to the file "T26LOW", Mast Lowering Device.jgg Rich `Wet Willie' T22 #261 ... finally ... as ... unavailable. ... had a ... ...
... Look in the file called "T26low"...while it's specific to the t26, I should think a similar arrangement could be made for the t22. I did have to add a...
Just received my Tanzer Talk and want to say Thanks to "King" Ralph for the moving prose, John for the newsletter and a question : Is Red Baron a T26? Thanks -...
It helps if you look in the right files , got it. I was looking in the E-mail files. Thanks guys, much appreciated. Cheers, Gordon T22 1860 ... Stainless ... ...
Someone else had a great idea for the shrouds. Obviously, you can't attach them while stepping, or they'd bend. Instead, connect the outer lower turnbarrels to...
I am looking to purchase a used #1 Genoa 170% in good shape for my T22. The sail must have hanks and a leech line and be 4 or 5 ounce Dacron. A viewing ...
Norm
ntoole@...
Feb 6, 2007 3:02 pm
33976
If you use the shrouds tied to the chainplates with small pieces of line then the problem is when you need to take the rope out to connect/disconnect the...
Hi, You can attach the lower shrounds when raising your mast. You just loosen them, it will work (at least on a T26). I then attached a pulley to the bow where...
I guess, by that time though, the dude connecting the forstay is now free to connect the shroud. Or a halyard can work. Or you can get 8 friends to help. But...
You can attach upper and lower on a T26, but NOT on a T22. I had the same issue on my P23. I used to attach one side, there was enough give to allow the mast...
Thank you Owen, and to all the Tanzer members who have written to me. Many members have email addreses listed in our membership record that bounce. If that...
Steve, Thanks for sharing the info. I am thinking this would be the way for me to go with my T22. Either on- or off-list, would you be willing/able to...
Greetings, Please post what information you can on this forum. I have studied the schematic drawing on the yahoo group site and "do not get it!." You could...
After going through all of the info in the files and reading the input from the group in response to my post I feel that using the tension spring idea makes a...
On my first T22, #365, to drop the mast, I moved the boom to the front of the mast and attached it to the spinnaker track. The spinnaker halyard held up the...
