Hello, My fuel injected '72 164E has a rough cold start idle. It will often die after the first turn of the key then idle rough on the 2nd. On the advice of...
I have a bad foglight lense story. I saw a parts car advertised on the internet and was delighted to see it had the fog lights in the picture. After...
Dismantle and clean the distributor particularly the advance springs. My 164 73 e was rough and juddered when the throttle was depresed slightly. Now with nice...
the 164 foglights pit and rust very easily and thus aren't worth the trouble. i have them as i have a near nfinite supply and thus aren't worried. the...
I've been driving my '75 around without its front bumper for years now, but a move now forces me to have the car inspected in a new jurisdiction. I need to put...
James do you have a foglight for left site in good condition? And what is your price? Per, Denmark ... From: James Maddison To: volvo100list@yahoogroups.com ...
Hi there, I've had some problems with my 1973 164E. She run's fine on LPG, but terrible on gas. I checked for vacuum leaks etc. but no luck. Today I took off...
First place to check would be the negative wire that runs from those three injectors to earth. All the earth wires for the injection end up in a big bunch...
Hi Paul, I checked the nagative wires and the connection next to the battery. All lookes nice and greasy, no rust. What's my next step?. Maarten ... those...
Get yourself an ohm meter & test it. Test the resistance of each bank back to the control unit, & then pull the distributor out, have a look at the trigger...
I have a close to perfect '72 164e, and I've stumbled on a '73 164 in decent condition (not running). I have the opportunity to strip parts -- though not a lot...
If you've got the room it's a good idea to get anything that can be removed! Heater fan, A/C Comp., FI system, seats, doors/hood/trunk.... I'd try to get the...
What models of 145 came with continuous injection in 1974? -- David Hallam Queanbeyan Australia -- A Merckx, Raleigh, Motobecane, Peugeot, Apollo, Volvo,...
All 74 140 U.S. Volvos came with CIS to my knowledge. The 164 soldiered on with the D jetronic till the end. CIS is a better system than the timed injection of...
Campbell, Fred W.
fwcampbell@...
Jul 14, 2004 4:12 pm
3094
Hey, I was curious about that new Spin-Flow filter I found on the Napa site (napafilters.com). Has anyone used one? I would love some feedback. Good, bad...
Hey, I was curious about that new Spin-Flow filter I found on the Napa site (napafilters.com). Has anyone used one? I would love some feedback. Good, bad...
Fred Thanks. I just fitting a CI system to my 145. I finally got sick of the carbies and the reaction of the diaframs to the higher octane fuel we have in Oz....
Oh forgot. I think the Oz models were not low compression. Certainly they did not have half the anti polution junk on it that some did. /dlh. ... -- David...
Hey Guys, I'd like to update you guys on work currently going on with my 164, but want to get a webpage up with some photos, first... So anyway, i am going to...
245 1984. auto in Oz But what you really NEED is a 165! ... /dlh. ... -- David Hallam Queanbeyan Australia -- A Merckx, Raleigh, Motobecane, Peugeot, Apollo,...
Hej Curt You are very welcome to visit me in Denmark in august if you have time. Per ... From: Curt To: volvo100list@yahoogroups.com Sent: Saturday, July 17,...
Yes I aggree with you Per ... From: zzdhalla To: volvo100list@yahoogroups.com Sent: Saturday, July 17, 2004 10:00 AM Subject: Re: [Volvo100list] Europe...
There are probably only two in the whole world, made as projects. Cheers, Peter. Per Truelsen <p.truelsen@...> wrote: Yes I aggree with you Per ... From:...
I would LOVE a 165, that would be perfect!! Though i don't think that will happen :-( Hopefully i will see some beut custom 164's on my travels. I will ...
I would love too! All my relies are in Southern part of Sweden, Höör. So yeah, I'll get back to you Per on that! :-) ... I would love too! All my relies are...
