hello group. I might of posted this here in the past but here goes. My 1975 164 will leak trans fluid when parked for a couple of days. it will hold it in just...
Hi George What happens there is not unusual. The fact is that in normal use, the torque converter is filled up with trans fluid. When the car is not used,...
Jean Louchet
jean.louchet@...
Apr 7, 2006 1:21 pm
3813
thanks for that info, i can handle any mechanical problems, i just don't like to do them. The simple solution is That I just need to drive it more. ... ...
Hi guys, I was just talking to my young nephew graduated in mechanic enginering and he brought out this question, wondering what's the "critical momentus" for...
check out this place guys, its great, my new homepage lol! http://www.lookatthatnow.info/txqr i only got on there about 2 hours ago, but already loving the...
brittney-steele812@...
Apr 13, 2006 7:10 pm
3816
ive got literally no 'game' as they say, haha, so have alot of trouble in the clubs tryin to pickup. im sure there is a few of u'se here just like that. so...
Yep I thought it was about time I shared what I have learnt over these years of playing around on my computer. Most things you will find around are usually...
brittney-steele812@...
Apr 21, 2006 11:19 am
3819
greetings, have been trying to line up a 200 series manual rack in a 140 front end and have found that you cant place the rack back far enough to have the tie...
Does it matter what fan your B30 has have when installing the add-on A/C system? I have the plastic one (standard) on my '69 automatic. I heard that the...
Jack, I dont know if you need a metal fan or not. All of my 164s have had AC, yrs 72 to 75 and metal fans. If you need a metal fan I have one from a 75 164....
hey guys, my power windows quit working the other day. The fuse is good, but there is no power to the switches. The switches also work. Is there a relay that...
a poor earth somewhere is a good place to start for your power windows issues. if you have a smell of petrol a lot check the condition of the flexible rubber...
I have a petrol smell on my 1974 164e. I have a small leak on the bottom of my petrol tank, as well as 1 leaky injector. Check the bottom of the tank, and...
thanks for the tips, i will definately check them out....where should I check for ground at? I would check at the window motor, but I am having problems with...
Hi guys! I need to replace one of those power steering hoses (the one on top that goes around near the brakes fluid container) its got a crack right there in...
My 164 will no longer start. I replaced the head and had valve set inserts installed as a result of overheating caused(i thought) form valve seat recession. ...
... I had the timing case seals replaced on my 164. It was running OK when I got it back, but I swapped distributors & it refused to start after I did the...
Anyone know if the hoods are all the same? Ive got a hood that I think would work for you. It is from a 75 model and it looks as if it would fit my 72. Color...
... Cisco We have just taken then to a hose place like ENZD and got new hose intalled with the original ends. /dlh. -- David Hallam in Queanbeyan Australia on...
I have a 75 hood on the car now. The only difference is the hole in the hood for the washer spray nozzle. I havn't been able to find a noozle so I just left...
my speedometer doesnt work. I havew determined with an electric drill that everything works from the removable drive gear up to the gauge. apparently the...
no you can get it out by undoing a bolt on the alloy housing at the back on the gearbox. the sleeve and the gear ( doubtless stripped unless cable between...
My brake booster (1973 164E) went out and I am trying to remove it. Two bolts came out easy enough, the third required a swivel-head socket. The last is a...
Ok, so i found and replaced the relay and now my windows are working correctly The relay is located against the firewall interior on the left hand side of the...
Hi, Same experience on my brother's 1975 242 brake booster. Fourth nut was pretty hard to get at but I could do it without special tools. If I recall I used a...
Jean Louchet
Jean.Louchet@...
May 29, 2006 10:58 pm
3838
Hi I'm looking to buy a late 60's early 70's 140 wagon. Must have solid body. I'm in Orlando area, but can travel. timztiques@... Thx! Tim...
Hello All. Does someone have a new fuel injector for my 164e B30f engine? Does anyone have a new Windscreen wiper switch stalk for my steering column?...
